Model: ReWie Kotter 1350
Type: Trawler
Category: Power Boats
Year Built: 2003
SPECIFICATIONS:
Length: 13.55 m
Width: 4.14 m
Depth: 1.45 m
Material: Steel
Hull Color: Blue

ACCOMMODATIONS:
Beds: 4
Location: Netherlands » Den Helder (NL)
Price: EUR 95.000,-

Motoryacht, self built The ReWie cutter 1350 is a tough and proven seaworthy motor yacht. Because of the round bilge and kim keels, the boat is stable in the sea, but also has a low draft, which makes it suitable for shallow waters such as the Wadden Sea. "Jordissa" is remarkably well maintained and is well painted. The hull is foam-insulated and suitable for a long stay on board, even semi-permanent residence. The decks are very spacious and passable and there is an inside and outside steering position. The boat was designed by Mr. Reitsma as a ketch rigged motor sailer. During the construction, all fixing points for rigging and fittings are prepared, but these are not present. Upon entering the wheelhouse there is an L-seat on the left with the steering position. A good steering seat is in the middle, but it can easily be set aside for extra space. Down the stairs to the fore ship you enter the kitchen annex dinette. Further forward is the guest cabin with toilet. Entirely in the stern is the spacious owner's cabin. In the boat is a lot of cupboard and storage space. The engine room can be reached by hinging up the stairs. All technology is professionally executed. This boat is brokered through the White Whale Yachtbrokers Enkhuizen office. If you are interested please contact us at #########@wwy.nl or +31 (0) 228 855 380 for more information or to make an appointment for viewing on board. Viewings are possible from Monday to Saturday.,GeneralSteering system: 2x Hydraulic hand steering pump, spare helmWindows: Hora; single steel glass in aluminum frameBallast: steel block + leadOther: Insulation through foamed walls and decks; skin thickness underwater ship 7 mm, rest 4 or 5 mm; (replace nuts assembly 2018-2014),AccommodationCurtains: off-whiteSaloons: wheelhouse and dinette / galleyHeadroom: at steering position 215 cm, minimum height 192 cm in wet cellEngine, electrics, waterYear: largely overhaul in 2001Engine hours: after overhaulCooling system: closed by / in kim keelsPropulsion: 3-blades, stainless steel, greasedDynamo: 2 x for light + start/thruster batteriesWater system: hydrophore Jabsco par-max elbi pressure vesselHot water: Fasto geyserWater tank & material: inside of tank coated with special drinking water tank coatingWaste water tank: in 2 tanksShorepower: 230v 32 Amp euro connection deck 16 Amp cable and plugVoltmeter: with 3-way switchTachometer: vdo inside and outsideWater tank gauge: connection presentFuel tank gauge: Gauge in engineOil pressure gauge: vdo inside and outsideTemperature gauge: vdo inside and outsideRig and sailsNumber of masts: ornamental; for navigational lights; VHF antenna,Navigation and electronicsRudder position indicator: VDOEquipmentAnchor windlass: Lofrans TigresSwimming ladder: loose, can be hung on the side or backDinghy: optionalOutboard engine: optionalSafetyWatertight door: engine room